~~ BOOKMARK AND PRINT THIS PAGE ~~

#page.title#

#page.description#

Cleans Old/Dry or New/Wet Stains!

There are two separate issues that need to be considered with pet urine in subfloors: stains and odors. You either have odors only, or you have visible stains AND odors. In either case, for dealing with the odors you will need to neutralize and contain the urine in the porous surface. For the stains, you will need to remove the urine by using a dry powder method.

If you have visible urine stains, follow these directions to REMOVE the urine stains:
Note: If you have urine odors only, skip this section go directly to the instruction on neutralizing and containing the urine odors.

Step 1: Pre-mist the soiled areas with Planet Urine's Soil Release Pre-Mist provided in your Do-It-Yourself Pet Stain and Odor Removal System. Do not saturate the areas! Using the Applicator Brush provided in the system, thoroughly work the Soil Release Pre-Mist into the stained area. This helps to release stubborn old/dry urine stains.

Step 2: Apply Planet Urine's UrineOut™ Powder. Work the powder into the soiled area with the Applicator Brush using a circular motion. Begin at the outer edge of the soiled area and work inward. Allow the powder to dry thoroughly.

Step 3: Thoroughly vacuum the UrineOut™ Powder out of the area. At this point the powder is now holding the urine and odors.


Follow these directions to NEUTRALIZE and CONTAIN the odors:

You have ONE rule to follow to eliminate urine odors in subfloors: Contain the source of the odor. That is, sealing the urine into the subfloor.

Don't worry! Your solution is very simple!

Step 1: Locate the areas where visible the pet urine stains or odors are noticeable. If you can't see any stains, but you can smell the urine odor, then you need to use a Planet Urine's Odor Detector Blacklight to locate these areas.

Step 2: Clean the subfloor thoroughly by spraying Planet Urine's Smells No-More!™ Odor Eliminator directly onto the soiled areas. Wipe clean with a sponge and water. This step kills all of the bacteria and germs and disinfects the areas. This is critical. Clean and allow the areas to dry thoroughly.

Smells No-More!™ Odor Eliminator is the most effective dog and cat urine odor eliminator you'll ever use... it works! Smells No-More!™ Odor Eliminator is the new standard for safe and easy pee odor control... available in a money saving gallon size bottle!

Step 3: Apply 3 more applications of Smells No-More!™ Odor Eliminator, allowing it to dry completely between each application. This will ensure that you have killed ALL of the bacteria. This will also clean and prepare the subfloor surface for the next step.

Step 4: Go to your hardware store and purchase KILZ Primer and Sealant. Following the directions on the container of KILZ paint the floor to seal in the urine. Repeat applications until there is no discoloration when the KILZ is dry. You may need to do up to 3 coats of KILZ if any urine "bleeds" through the KILZ while it is drying.

Step 5: Disinfect the areas again with the Smells No-More!™ Odor Eliminator for additional bacteria control. Allow to dry completely.

Step 6: Treat the areas with No-P!™ Housebreaking Aid to remove urine SCENTS. When sprayed on the soiled area, No-P!™ Housebreaking Aid will keep any other pets from resoiling in the areas.